Author Topic: 4.6l 3V swap  (Read 715 times)

0 Members and 1 Guest are viewing this topic.

dman64

  • Newbie
  • *
  • Posts: 25
4.6l 3V swap
« on: January 06, 2016, 09:45:19 PM »
Has anyone local done a 4.6L 3V swap yet or considering one?

Darcy.

Matthew

  • Administrator
  • Hero Member
  • *****
  • Posts: 1225
Re: 4.6l 3V swap
« Reply #1 on: January 07, 2016, 09:20:36 AM »
Kevin is putting one in his '38 Ford right now and has a thread on here about it.

-Matthew

dman64

  • Newbie
  • *
  • Posts: 25
4.6l 3V swap
« Reply #2 on: January 07, 2016, 06:42:09 PM »
I saw that and posted a question asking what his plan is. Thanks.

dman64

  • Newbie
  • *
  • Posts: 25
4.6l 3V swap
« Reply #3 on: January 09, 2016, 10:40:42 AM »
Hey Matthew with your programming software is there an option in there to disable PATS and Anti theft so we could start the vehicle? I have the factory PCM and engine wiring harness which has can possibly diet down to save a bit of cash, the exchange rate is crap right now so buying a harness from the US is getting mor expensive everyday.

Matthew

  • Administrator
  • Hero Member
  • *****
  • Posts: 1225
Re: 4.6l 3V swap
« Reply #4 on: January 15, 2016, 10:47:53 PM »
Yes, when I can see that it is a legit swap project and not something nefarious I can turn all of that stuff off for you.

-Matthew

dman64

  • Newbie
  • *
  • Posts: 25
4.6l 3V swap
« Reply #5 on: January 18, 2016, 09:05:56 PM »
No worries I did purchase it off of a local long standing dynotuning company that you would know if I named them. They offered the VIN if we need it to do programming. The guy swapped a Shelby 5.4 in his 06 gt.